Skip to content

Can I Use Inkjet Paper In a Laser Printer?

Quick Answer: No, you cannot use inkjet photo paper in a laser printer because the laser printers work differently and are not designed to print on inkjet paper that has a special coating formulated for spray-on ink. Inkjet photo paper isn’t designed to bear the heat of a laser printer in the process of fusing melted toner into the paper and that’s why it’s recommended to use laser photo paper.

If you use inkjet photo paper with a laser printer, the paper will melt from the heat a laser printer will produce. Laser printers use dry powder ink, which means laser photo paper is coated with a special layer and can bear the heat. This printer also uses high heat to fuse the toner.

Related – Can I Use Inkjet Labels in my Laser Printer?

What is the Best Photo Paper for Laser Printers

You can consider Glossy and Matte Photo Paper. For a laser printer, glossy paper is the best option because it offers some standard sizes such as 8×10 or 11×14. Glossy paper will produce better results than matte or semi-gloss paper.

The Matte is also a good choice and can be used for laser printers but it has a few flaws. Genuinely, matte paper is a better choice for inkjet printer users.

Glossy paper will produce better results than matte or semi-gloss paper. A good glossy photo paper can be used for printing photographs.

Glossy Photo Paper for Laser Printer

Using glossy photo paper is the fastest and simplest way to print photos on your laser printer. Since this type of paper is smooth and glossy, it allows light to reflect off of the paper surface, creating a glossy print.

Glossy paper reflects light, giving it a more saturated color. Typically, glossy photo paper is much more expensive than matte paper. But, since it allows you to create vibrant, clear, rich colors, glossy paper is often preferred for prints.

If you want a bold, clear, and vivid print, choose glossy paper. Remember that glossy paper looks good in a little bit darker areas, so don’t worry if the photo reflects the lights.

Matte Photo Paper for Laser Printer

Matte photo paper is also used in laser printers because it allows the laser beam to focus well on the page. The matte layer absorbs light, resulting in higher contrast in the image, which makes the colors on the print appear more vivid.

On the other hand, it is also good for printing black and white photos. It helps the shadows appear more detailed and the highlights appear clearer. But it’s not recommended to use matte paper when you’re printing in color as the color look dull on matte paper.

How to use A Printing Photo Paper in a Laser Printer

Photo paper is a thin, flexible sheet of paper that is being used to print photos. If you want to print photos with your laser printer, you must keep in mind 5 things before you get ready.

Also, the paper you print should be durable, environmentally friendly, and easy to use. Below are the 5 most important facts that you must keep in mind before printing.

  • Know what kind of paper you’re using.
  • Choose the Right Size
  • Don’t use too much ink
  • Check your settings
  • Be careful when you remove the paper from the tray

Know What Kind of Paper you’re Using

Make sure that the paper you’re using is compatible with your printer. If you’re not sure, check the manufacturer’s website. Also, make sure that the paper has been tested by the manufacturer before shipping.

Choose the Right Size

Before you start printing, make sure that you set up your printer correctly. This includes setting the correct resolution (the number of dots per inch) and color mode (CMYK or RGB). Make sure that your inkjet cartridge is full, and that the toner level is low enough so that you won’t run out of ink.

Don’t use too much ink

If you’re using an inkjet printer, you should avoid using more than one drop of ink at a time. Otherwise, you’ll end up wasting ink and running out before you finish printing.

RelatedCan I Use Eco Solvent Ink in my Inkjet Printer?

Check your Settings

To make sure you’re not wasting ink, check your settings first. You can do this by going into your printer’s menu and selecting “Print Settings.”

Then, select “Color” and “Black & White,” and set the number of drops per inch (dpi) to 300. This will ensure that you only use one drop of ink per square inch of paper.

Be careful when you Remove the Paper from the Tray.

If you’re using an inkjet printer, you’ll need to be careful when removing the paper from the tray because the paper can stick to the rollers. If you accidentally pull too hard, you might damage the rollers. Instead, gently lift the paper out of the tray.

Final Words From InkLaserPrint

Well, as we have discussed, You can use inkjet paper in a laser printer, but you have to sacrifice the Quality. Otherwise, Inkjet paper is designed to be fed into laser printers and that’s not a problem.

But as you know, Laser printer paper is designed to be used in laser printers but should not continue using inkjet printer paper in a laser printer. It is recommended to be careful while your printer prints on both sides of the paper because it might cause problems. So, our suggestion would be to use only one side of the paper. Using double-sided paper may cause ink from one side to transfer onto the other side.


More From InkLaserPrint